Wheel & Kiln › How much glaze for a 5 gallon bucket?
How much glaze for a 5 gallon bucket?
About 24 lb (11.1 kg) of dry glaze and 2.9 US gallons (10.9 L) of water fills a 5 gallon bucket to 80% at a dipping consistency of SG 1.45. At SG 1.50 it takes about 27 lb.
Dry glaze by bucket size (80% full)
| Bucket | SG 1.40 | SG 1.45 | SG 1.50 |
|---|---|---|---|
| 1 gal | 4.3 lb / 2 kg | 4.9 lb / 2.2 kg | 5.4 lb / 2.5 kg |
| 2 gal | 8.7 lb / 3.9 kg | 9.8 lb / 4.4 kg | 10.8 lb / 4.9 kg |
| 3.5 gal | 15.2 lb / 6.9 kg | 17.1 lb / 7.8 kg | 19 lb / 8.6 kg |
| 5 gal | 21.7 lb / 9.8 kg | 24.4 lb / 11.1 kg | 27.1 lb / 12.3 kg |
| 10 L | 11.5 lb / 5.2 kg | 12.9 lb / 5.9 kg | 14.3 lb / 6.5 kg |
| 20 L | 22.9 lb / 10.4 kg | 25.8 lb / 11.7 kg | 28.7 lb / 13 kg |
Mixing a full bucket
- Put about three quarters of the expected water in the bucket first.
- Add the weighed dry materials gradually and let them slake for a few minutes.
- Mix with a drill mixer, sieve, then add the rest of the water bit by bit while checking specific gravity.
Scale the recipe with the glaze batch calculator.
Questions potters ask
How much dry glaze for a 5 gallon bucket?
About 24 lb (11.1 kg) of dry glaze plus about 2.9 gallons of water fills a 5 gallon bucket to 80% at SG 1.45. Many potters mix 10 kg batches for a 5 gallon bucket.
How much glaze for a 1 gallon bucket?
About 4.9 lb dry at SG 1.45 when filled to 80%.
How much glaze do I need to dip a mug?
Enough depth to dip the whole mug in one go: a mug 5 inches tall needs a bucket with at least 6 inches of glaze. That is why dipping buckets need far more glaze than the pots actually take up.
Does a full bucket go off?
Most glazes keep for months if covered. Stir thoroughly, check SG, and top up with water lost to evaporation.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.