Wheel & Kiln › Kiln cone chart: cone temperatures in °F and °C
Kiln cone chart: cone temperatures in °F and °C
Cone 06 ≈ 1828 °F (998 °C), cone 04 ≈ 1945 °F (1,063 °C), cone 6 ≈ 2232 °F (1,222 °C) and cone 10 ≈ 2345 °F (1,285 °C), for self-supporting cones with a final heating rate of 108 °F (60 °C) per hour. At 270 °F per hour each cone bends about 20–40 °F hotter.
Common firing ranges
| Range | Cones | Typical use |
|---|---|---|
| Lustre / decals | 022–014 | Overglaze enamels, lustres, decals |
| Low fire | 06–04 | Bisque, earthenware, low-fire glazes |
| Mid fire | 4–7 | Studio stoneware and porcelain (cone 6) |
| High fire | 8–10 | Traditional stoneware, porcelain, reduction |
Full cone chart
| Cone | At 108 °F/hr (60 °C/hr) | At 270 °F/hr (150 °C/hr) |
|---|---|---|
| Cone 022 | 1087 °F / 586 °C | 1094 °F / 590 °C |
| Cone 021 | 1112 °F / 600 °C | 1143 °F / 617 °C |
| Cone 020 | 1159 °F / 626 °C | 1180 °F / 638 °C |
| Cone 019 | 1252 °F / 678 °C | 1283 °F / 695 °C |
| Cone 018 | 1319 °F / 715 °C | 1353 °F / 734 °C |
| Cone 017 | 1360 °F / 738 °C | 1405 °F / 763 °C |
| Cone 016 | 1422 °F / 772 °C | 1465 °F / 796 °C |
| Cone 015 | 1456 °F / 791 °C | 1504 °F / 818 °C |
| Cone 014 | 1485 °F / 807 °C | 1540 °F / 838 °C |
| Cone 013 | 1539 °F / 837 °C | 1582 °F / 861 °C |
| Cone 012 | 1582 °F / 861 °C | 1620 °F / 882 °C |
| Cone 011 | 1607 °F / 875 °C | 1641 °F / 894 °C |
| Cone 010 | 1657 °F / 903 °C | 1679 °F / 915 °C |
| Cone 09 | 1688 °F / 920 °C | 1706 °F / 930 °C |
| Cone 08 | 1728 °F / 942 °C | 1753 °F / 956 °C |
| Cone 07 | 1789 °F / 976 °C | 1809 °F / 987 °C |
| Cone 06 | 1828 °F / 998 °C | 1855 °F / 1,013 °C |
| Cone 05½ | 1859 °F / 1,015 °C | 1877 °F / 1,025 °C |
| Cone 05 | 1888 °F / 1,031 °C | 1911 °F / 1,044 °C |
| Cone 04 | 1945 °F / 1,063 °C | 1971 °F / 1,077 °C |
| Cone 03 | 1987 °F / 1,086 °C | 2019 °F / 1,104 °C |
| Cone 02 | 2016 °F / 1,102 °C | 2052 °F / 1,122 °C |
| Cone 01 | 2046 °F / 1,119 °C | 2080 °F / 1,138 °C |
| Cone 1 | 2079 °F / 1,137 °C | 2109 °F / 1,154 °C |
| Cone 2 | 2088 °F / 1,142 °C | 2127 °F / 1,164 °C |
| Cone 3 | 2106 °F / 1,152 °C | 2138 °F / 1,170 °C |
| Cone 4 | 2124 °F / 1,162 °C | 2161 °F / 1,183 °C |
| Cone 5 | 2167 °F / 1,186 °C | 2205 °F / 1,207 °C |
| Cone 5½ | 2197 °F / 1,203 °C | 2237 °F / 1,225 °C |
| Cone 6 | 2232 °F / 1,222 °C | 2269 °F / 1,243 °C |
| Cone 7 | 2262 °F / 1,239 °C | 2295 °F / 1,257 °C |
| Cone 8 | 2280 °F / 1,249 °C | 2320 °F / 1,271 °C |
| Cone 9 | 2300 °F / 1,260 °C | 2336 °F / 1,280 °C |
| Cone 10 | 2345 °F / 1,285 °C | 2381 °F / 1,305 °C |
Large and junior cones and cone sitter bars bend at slightly different temperatures; use your cone maker's chart for the cones you buy.
Questions potters ask
What temperature is cone 6?
2232 °F (1,222 °C) at a final heating rate of 108 °F/hour, or 2269 °F (1,243 °C) at 270 °F/hour, for self-supporting cones.
Why does the cone temperature depend on heating rate?
Cones measure heat work, the combined effect of temperature and time. A slow final climb bends the cone at a lower temperature than a fast one.
What are low, mid and high fire?
Roughly: low fire is cone 06–04 (earthenware, many bisque firings), mid-fire is cone 4–7 (most studio stoneware today, cone 6 especially) and high fire is cone 8–10 (traditional stoneware and porcelain).
Should I trust my kiln's thermocouple or cones?
Use both. A thermocouple shows temperature now; witness cones show the heat work the ware actually received, and reveal hot and cold spots across shelves.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.