How much clay do I need? Clay weight calculator
Work backwards from the finished pot. A 12 oz mug takes about 1 lb 0 oz on the wheel plus about 3 oz for a handle; a 7.5 inch ramen bowl about 2 lb 8 oz; a 10 inch dinner plate about 3 lb 5 oz. Enter your own finished size, wall thickness and clay below: the calculator works out the clay in the walls, adds the water that dries out, the material that burns off in the kiln and your trimming, and tells you how big to throw it.
What drives the weight
- Wall thickness. The biggest single factor. Going from 1/4 in (6 mm) to 3/16 in (5 mm) saves about one sixth of the clay.
- Trimming. A bowl with a trimmed foot can lose 25–35% of the ball as trimmings. A mug trimmed only at the base loses 10–15%.
- Shrinkage. Mid-fire stoneware shrinks about 12% in length, so a pot loses about a third of its volume. You throw it bigger, not heavier, but the size targets change.
- Water and burn-off. Wet clay is about a fifth water, and a further 5–8% of the dry weight burns away. Fired pots weigh roughly 70% of the clay in their walls.
Clay weight chart for common forms
Mid-fire stoneware, typical walls, with trimming allowance and handles included where marked. Use it as a starting point, then weigh your own best pot and adjust.
| Form (finished size) | Clay to weigh out | Fired weight | Throw it about |
|---|---|---|---|
| Espresso cup (3 oz) | 8 oz (218 g) | 5 oz (143 g) | 2.2 in wide × 2.2 in tall |
| Small cup / tea cup (6 oz) | 12 oz (341 g) | 8 oz (224 g) | 2.8 in wide × 2.5 in tall |
| Mug, 8 oz | 14 oz (407 g) | 9 oz (266 g) | 2.9 in wide × 3.3 in tall |
| Mug, 12 oz | 1 lb 3 oz (540 g) | 12 oz (353 g) | 3.3 in wide × 3.8 in tall |
| Mug, 16 oz | 1 lb 6 oz (636 g) | 15 oz (415 g) | 3.6 in wide × 4.1 in tall |
| Mug, 20 oz | 1 lb 10 oz (750 g) | 1 lb 1 oz (489 g) | 3.9 in wide × 4.5 in tall |
| Tumbler, 14 oz (no handle) | 1 lb 3 oz (546 g) | 12 oz (349 g) | 2.9 in wide × 5.7 in tall |
| Matcha bowl (4.75 in) | 1 lb 7 oz (640 g) | 13 oz (362 g) | 5.4 in wide × 3.4 in tall |
| Cereal bowl (6 in) | 1 lb 6 oz (632 g) | 13 oz (372 g) | 6.8 in wide × 3 in tall |
| Soup bowl (6.5 in) | 1 lb 14 oz (837 g) | 1 lb 1 oz (492 g) | 7.4 in wide × 3.4 in tall |
| Ramen bowl (7.5 in) | 2 lb 8 oz (1.14 kg) | 1 lb 8 oz (672 g) | 8.5 in wide × 3.6 in tall |
| Pasta bowl (9 in, shallow) | 2 lb 15 oz (1.34 kg) | 1 lb 12 oz (787 g) | 10.2 in wide × 2.3 in tall |
| Serving bowl (10 in) | 5 lb 5 oz (2.41 kg) | 3 lb 0 oz (1.36 kg) | 11.4 in wide × 4.5 in tall |
| Side plate (7.5 in) | 1 lb 12 oz (801 g) | 1 lb 1 oz (471 g) | 8.5 in wide × 0.9 in tall |
| Dinner plate (10 in) | 3 lb 5 oz (1.51 kg) | 1 lb 15 oz (885 g) | 11.4 in wide × 1.1 in tall |
| Dinner plate (11 in) | 4 lb 3 oz (1.9 kg) | 2 lb 7 oz (1.11 kg) | 12.5 in wide × 1.3 in tall |
| Cylinder vase (4 × 9 in) | 4 lb 3 oz (1.89 kg) | 2 lb 9 oz (1.16 kg) | 4.5 in wide × 10.2 in tall |
How to calibrate it to your own throwing
- Throw a pot you are happy with from a weighed ball and note the weight.
- After firing, measure the inside diameter and height and weigh the pot.
- Enter the sizes here and adjust the wall thickness until the fired weight matches yours. Keep that thickness and trimming figure for future estimates.
More calculators
- Clay for a mug by ounces
8, 12, 16 and 20 oz with handles.
- Shrinkage calculator
Test bars, wet size and capacity.
- Pots per bag
How far 25 lb or 10 kg goes.
- Glaze batch
Scale a recipe and set the water.
Questions potters ask
How much clay do I need for a mug?
About 1 lb to 1 lb 4 oz for a 12 oz mug plus about 3 oz for the handle, and roughly 1 lb 4 oz to 1 lb 8 oz for a 16 oz mug. Thin throwers need less, beginners usually more.
How much clay for a bowl?
A 6 inch cereal bowl takes about 1 lb 4 oz to 1 lb 8 oz, a 7.5 inch ramen bowl about 2 lb 8 oz, and a 10 inch serving bowl 4 lb or more, depending on wall thickness and how much you trim.
Why do clay weight charts disagree?
They assume different wall thicknesses, foot rings and trimming. A pot with 6 mm walls uses about 20% more clay than the same pot at 5 mm, and a trimmed foot can remove a quarter of the ball.
Should I weigh clay before throwing?
Yes. Weighing balls is the single easiest way to make matching sets: the same weight, centred the same way, gives pots of similar size.
Does porcelain need more clay than stoneware?
Slightly more by weight for the same pot, because it is a little denser and shrinks more, so you throw it bigger.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.