Wheel & Kiln › How much clay for a bowl?
How much clay for a bowl?
About 1 lb 6 oz for a 6 inch cereal bowl, 2 lb 8 oz for a 7.5 inch ramen bowl and 5 lb 5 oz for a 10 inch serving bowl, in mid-fire stoneware with a trimmed foot. Weight climbs quickly with size: a bowl 25% wider needs roughly 60–80% more clay, because the walls usually get thicker too.
Bowl chart
| Finished size | Clay to weigh out | Holds (to rim) | Throw it about |
|---|---|---|---|
| 5 in small bowl | 1 lb 0 oz (443 g) | 13 oz | 5.7 in × 2.5 in |
| 6 in cereal bowl | 1 lb 6 oz (632 g) | 22 oz | 6.8 in × 3 in |
| 6.5 in soup bowl | 1 lb 14 oz (837 g) | 30 oz | 7.4 in × 3.4 in |
| 7 in noodle bowl | 2 lb 4 oz (1.02 kg) | 35 oz | 8 in × 3.4 in |
| 7.5 in ramen bowl | 2 lb 8 oz (1.14 kg) | 42 oz | 8.5 in × 3.6 in |
| 8 in bowl | 2 lb 13 oz (1.28 kg) | 49 oz | 9.1 in × 3.6 in |
| 9 in pasta bowl (shallow) | 2 lb 15 oz (1.34 kg) | 44 oz | 10.2 in × 2.3 in |
| 10 in serving bowl | 5 lb 5 oz (2.41 kg) | 96 oz | 11.4 in × 4.5 in |
| 12 in salad bowl | 7 lb 15 oz (3.6 kg) | 155 oz | 13.6 in × 5.1 in |
Getting the size right
- Throw the rim about 14% wider than the finished size for 12% shrinkage, plus a little more if you will trim the outside wall.
- Leave the base thick enough to trim a foot: about 1/2 inch for bowls with a tall foot ring, 1/4 to 3/8 inch for a simple recessed base.
- Check depth with a ruler across the rim at the wet stage. Depth shrinks too.
Questions potters ask
How much clay for a cereal bowl?
About 1 lb 6 oz for a 6 inch finished cereal bowl with a trimmed foot. Many potters use 1.5 lb as a standard cereal-bowl ball.
How much clay to make a bowl on the wheel for a beginner?
Start with 1 to 1.5 lb. Small balls are easier to centre and you can make several bowls per session to practise. Expect beginner bowls to be heavier than the chart.
Why do my bowls come out smaller than planned?
Trimming a foot ring removes clay from the outside, and shrinkage takes about 12% off every dimension. Throw about 14% wider than the finished rim for stoneware.
How much clay for nesting bowls?
Pick the largest bowl's ball, then reduce each smaller bowl by about 20–30% in weight. Throwing each bowl to a rim width about 1 inch smaller gives a neat nest after shrinkage.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.