Wheel & Kiln › How much clay for a mug? (8 to 24 oz)
How much clay for a mug? (8 to 24 oz)
About 1 lb for a 12 oz mug body and about 1 lb 4 oz for a 16 oz, plus 2–4 oz for the handle. Those figures assume mid-fire stoneware, 3/16 inch (5 mm) walls and light trimming. Throw the mug about 45% bigger in volume than you want it to hold, because a 12% shrink takes away about a third of its capacity.
Mug sizes at a glance
| Finished | Body ball | Handle | Wet capacity |
|---|---|---|---|
| 8 oz | 12 oz | 2 oz | 11.7 oz |
| 10 oz | 14 oz | 2 oz | 14.7 oz |
| 12 oz | 1 lb 0 oz | 3 oz | 17.6 oz |
| 14 oz | 1 lb 2 oz | 3 oz | 20.5 oz |
| 16 oz | 1 lb 3 oz | 3 oz | 23.5 oz |
| 20 oz | 1 lb 7 oz | 4 oz | 29.3 oz |
| 24 oz | 1 lb 9 oz | 4 oz | 35.2 oz |
Dimensions to throw (classic shape)
| Finished capacity | Wet inside size | Finished inside size | Fired weight |
|---|---|---|---|
| 8 oz | 2.86 × 3.29 in | 2.52 × 2.9 in | 9 oz (266 g) |
| 10 oz | 3.08 × 3.55 in | 2.71 × 3.12 in | 11 oz (302 g) |
| 12 oz | 3.28 × 3.77 in | 2.88 × 3.32 in | 12 oz (353 g) |
| 14 oz | 3.45 × 3.97 in | 3.04 × 3.49 in | 14 oz (385 g) |
| 16 oz | 3.61 × 4.15 in | 3.17 × 3.65 in | 15 oz (415 g) |
| 20 oz | 3.89 × 4.47 in | 3.42 × 3.93 in | 1 lb 1 oz (489 g) |
| 24 oz | 4.13 × 4.75 in | 3.63 × 4.18 in | 1 lb 3 oz (542 g) |
Capacity to the brim. Classic shape = height about 1.15 × width. Squat or tall shapes change the size, not much the weight.
Check capacity while it is wet
Measure the wet mug with water from a measuring jug as soon as it firms up enough to handle (or measure a test cylinder). Compare with the “wet capacity” figure. If you are short, the next one needs a slightly bigger ball or thinner walls.
Questions potters ask
How much clay for a 12 oz mug?
About 1 lb (450 g) for the body plus 2–3 oz (60–85 g) for a pulled handle, in mid-fire stoneware with 3/16 in walls. Throw it to hold about 17–18 oz wet.
How much clay for a 16 oz mug?
About 1 lb 4 oz (560 g) for the body plus about 3 oz for the handle. Many potters start with 1.5 lb to leave room for trimming and mistakes.
How big should I throw a mug to get 12 oz?
With 12% shrinkage, aim for about 17.6 oz wet capacity, roughly 3.3 in inside diameter and 3.8 in tall, before trimming.
How much clay for a mug handle?
A pulled handle for an average mug uses 2–3 oz (60–85 g) of clay; a large mug handle 3–4 oz. Pull from a carrot of about that weight; leftover is reclaimed.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.