Wheel & Kiln › About Wheel & Kiln
About Wheel & Kiln
Wheel & Kiln answers the practical questions that come up at the wheel and the kiln: how big a ball to weigh out, how big to throw so a pot finishes at the right size, how much glaze fills a bucket, and what temperature a cone means.
How the numbers are worked out
Clay weights come from the geometry of the finished pot (inside size plus wall and base thickness), the fired density of the clay body, typical water content and loss on ignition, and an allowance for trimming. The model is checked against the ball weights potters commonly use, so a 12 oz mug comes out around a pound plus the handle. Shrinkage uses linear and volume relationships; glaze and plaster maths use standard slurry density formulas; cone temperatures are the published equivalents for self-supporting cones.
Limits
Every potter throws differently. Treat the results as a starting point, weigh your balls, measure a test pot and adjust the wall and trimming inputs until the calculator matches your work. Always follow your clay, glaze and plaster supplier's data and safety sheets.
Questions or corrections: contact us.