Wheel & Kiln › How much clay for a dinner plate?
How much clay for a dinner plate?
About 3 lb 5 oz for a 10 inch dinner plate and about 1 lb 12 oz for a 7.5 inch side plate, in mid-fire stoneware with a trimmed foot. Throw the plate about 14% wider than the finished size (11.4 inches wet for a 10 inch plate).
Plate chart
| Finished size | Clay to weigh out | Holds (to rim) | Throw it about |
|---|---|---|---|
| 6 in dessert plate | 1 lb 2 oz (498 g) | – | 6.8 in × 0.8 in |
| 7.5 in side plate | 1 lb 12 oz (801 g) | – | 8.5 in × 0.9 in |
| 8.5 in salad plate | 2 lb 7 oz (1.1 kg) | – | 9.7 in × 1 in |
| 10 in dinner plate | 3 lb 5 oz (1.51 kg) | – | 11.4 in × 1.1 in |
| 10.5 in dinner plate | 3 lb 10 oz (1.65 kg) | – | 11.9 in × 1.1 in |
| 11 in dinner plate | 4 lb 3 oz (1.9 kg) | – | 12.5 in × 1.3 in |
| 12 in charger / platter | 5 lb 11 oz (2.58 kg) | – | 13.6 in × 1.4 in |
Why plates use so much clay
Most of a plate's clay is in its floor. A 10 inch plate has a floor about 7 inches across; at 8 mm thick that alone is more clay than a whole 12 oz mug. Keeping the floor no thicker than it needs to be (and trimming the underside evenly) saves clay and reduces cracking.
Questions potters ask
How much clay for a dinner plate?
About 3 lb 5 oz for a 10 inch finished plate, 4 lb 3 oz for 11 inches. Many potters throw 3.5 to 4 lb balls for dinner plates.
How do I stop plates cracking?
Compress the floor thoroughly with a rib while throwing, keep the floor and rim thickness similar, dry slowly under plastic, and flip them onto a bat once leather hard so both sides dry evenly.
What size should I throw a 10 inch plate?
About 11.4 inches across wet for 12% shrinkage, plus a little extra if you trim the outer edge.
Why do my plates warp in the kiln?
Uneven thickness, a thick centre with thin rims, or drying faster on one side. Firing on a flat shelf with a thin layer of silica or alumina under large plates can help them move evenly.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.