Wheel & Kiln › Cone 04 vs cone 06 bisque
Cone 04 vs cone 06 bisque
Cone 06 bisque (about 1828 °F / 998 °C) leaves ware more porous and easier to glaze; cone 04 (about 1945 °F / 1,063 °C) is about 117 °F hotter, burns out more carbon and sulphur, and gives a slightly stronger, less absorbent bisque. Most studios pick one and adjust glaze thickness to suit.
Side by side
| Cone 06 | Cone 04 | |
|---|---|---|
| Temperature (108 °F/hr) | 1828 °F / 998 °C | 1945 °F / 1,063 °C |
| Porosity | Higher | Lower |
| Glaze uptake | Faster, thicker coat | Slower, thinner coat |
| Strength for handling | Good | Slightly better |
| Burnout of organics | Less complete | More complete |
Adjusting your glaze
If you switch from cone 06 to cone 04 bisque, test dip times and consider raising glaze specific gravity a little. The specific gravity calculator tells you how much water to add or remove to hit a target.
Questions potters ask
Is cone 04 or 06 better for bisque?
Neither is universally better. Cone 06 leaves the ware more porous, so it takes glaze more easily. Cone 04 burns out more organic matter and gives a slightly stronger, less absorbent bisque, which helps with pinholing in some glazes. Follow your clay and glaze supplier's advice.
What temperature is a bisque firing?
Usually cone 06 (1828 °F, 998 °C) or cone 04 (1945 °F, 1,063 °C) at 108 °F per hour.
Do I need to adjust glaze for a cone 04 bisque?
Often yes. The less porous ware absorbs water more slowly, so glaze goes on thinner. Raise the specific gravity slightly or dip a little longer.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.