Wheel & Kiln › How much clay for a vase or cylinder?

How much clay for a vase or cylinder?

About 3 lb 12 oz for a 4 × 8 inch finished cylinder vase with 1/4 inch walls, and about 11 lb 4 oz for a 6 × 14 inch one. For bellied or bottle shapes, enter the widest diameter: the estimate runs slightly high, which leaves clay for shaping.

How much clay do I need?

After firing.

Bowls default to 45% of the rim, plates 70%.

3/16 in ≈ 5 mm, 1/4 in ≈ 6 mm.

15% lightly trimmed, 25–35% with a trimmed foot.

Leave blank for the typical figure.

Cylinder vase chart

Finished (inside)ClayFired weight
3 × 6 in2 lb 2 oz (959 g)1 lb 5 oz (587 g)
4 × 8 in3 lb 12 oz (1.71 kg)2 lb 5 oz (1.04 kg)
4 × 10 in4 lb 9 oz (2.07 kg)2 lb 13 oz (1.27 kg)
5 × 10 in5 lb 14 oz (2.66 kg)3 lb 10 oz (1.63 kg)
5 × 12 in8 lb 0 oz (3.63 kg)4 lb 14 oz (2.22 kg)
6 × 14 in11 lb 4 oz (5.09 kg)6 lb 14 oz (3.12 kg)
Advertisement
Ad space

Small cups, tumblers and espresso cups

Form (finished size)Clay to weigh outFired weightThrow it about
Espresso cup (3 oz)8 oz (218 g)5 oz (143 g)2.2 in wide × 2.2 in tall
Small cup / tea cup (6 oz)12 oz (341 g)8 oz (224 g)2.8 in wide × 2.5 in tall
Tumbler, 14 oz (no handle)1 lb 3 oz (546 g)12 oz (349 g)2.9 in wide × 5.7 in tall

Questions potters ask

How much clay for a vase?

For a cylinder vase, about 2 lb for 3 × 6 inches finished, about 4 to 4.5 lb for 4 × 9–10 inches and around 10 lb or more for 6 × 14 inches, with 1/4 inch walls. Thinner walls need noticeably less; bellied forms need extra for the clay you push out.

How much clay to throw a tall cylinder?

Height comes from technique more than weight. As a guide, 3 lb is a common practice ball for cylinders; skilled throwers pull 8–10 inches from it with thin walls.

How do I estimate clay for a bellied vase?

Use the widest diameter and the height in the calculator as a cylinder: that slightly overestimates, which leaves clay for shaping.

How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.