Wheel & Kiln › How much clay for a matcha bowl?
How much clay for a matcha bowl?
About 1 lb 7 oz (0.64 kg) for a typical 4.75 inch matcha bowl in mid-fire stoneware, including clay you will trim away. A matcha bowl (chawan) is typically 4.5–5 inches across and about 3 inches deep finished, with room inside to whisk and a substantial foot. Throw it about 5.4 inches across and 3.4 inches deep wet.
Matcha bowl sizes
| Finished size | Clay to weigh out | Holds (to rim) | Throw it about |
|---|---|---|---|
| 4.5 in (small) | 1 lb 3 oz (552 g) | 13 oz | 5.1 in × 3.1 in |
| 4.75 in (typical) | 1 lb 7 oz (640 g) | 16 oz | 5.4 in × 3.4 in |
| 5 in (generous) | 1 lb 11 oz (767 g) | 19 oz | 5.7 in × 3.6 in |
| 5.5 in (wide, summer style) | 1 lb 8 oz (670 g) | 18 oz | 6.3 in × 2.8 in |
Tips
- Leave the floor wide and gently rounded so a whisk can move freely.
- A matcha bowl's foot is often tall and carefully trimmed, so allow 30% or more for trimming.
- Thicker walls hold heat and feel good in the hands; 6 mm is a common finished wall.
- Weight in the hand matters: compare the fired weight figure with bowls you like.
Questions potters ask
How big should a matcha bowl be?
About 4.5–5 inches across and 2.75–3.25 inches deep finished; wider, shallower bowls are traditional for summer.
How much clay for a chawan?
Most potters throw 1 lb 4 oz to 1 lb 12 oz for a chawan, depending on how much of the foot they carve or trim.
Why is my bowl smaller than planned after firing?
Stoneware shrinks about 12% in every direction, so a 7.5 inch finished bowl must be about 8.5 inches wet. Trimming the outside wall takes a little more.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.