Wheel & Kiln › How much clay for a 12 oz mug?
How much clay for a 12 oz mug?
About 1 lb 0 oz (455 g) on the wheel, plus about 3 oz (85 g) for a pulled handle. To finish at 12 oz after a 12% shrink, throw it to hold about 18 oz wet: roughly 3.3 inches wide inside and 3.8 inches tall. The fired mug will weigh about 12 oz.
12 oz mug variations
| Version | Body ball | Wet size (inside) |
|---|---|---|
| Classic (stoneware) | 1 lb 0 oz | 3.3 × 3.8 in |
| Squat | 1 lb 0 oz | 3.6 × 3.2 in |
| Tall | 1 lb 1 oz | 3 × 4.5 in |
| Porcelain (14% shrink) | 1 lb 1 oz | 3.4 × 3.9 in |
| Earthenware (8% shrink) | 14 oz | 3.1 × 3.6 in |
Step by step
- Weigh 1 lb 1 oz of wedged clay for the body.
- Throw to about 3.8 in tall and 3.3 in across inside, walls about 1/4 in at this stage (they thin slightly when trimmed).
- Leave about 1/4 to 3/8 in of clay in the base before trimming.
- Pull a handle from a 3 oz carrot and attach at leather hard.
- After firing, fill with a measuring jug to check. Adjust the next ball by about 1 oz per ounce of capacity you are off.
Questions potters ask
How many pounds of clay for a 12 oz mug?
About 1 lb 0 oz for the body and about 3 oz for the handle, 1 lb 3 oz in all, in mid-fire stoneware with 3/16 inch walls.
What size do I throw a 12 oz mug?
About 3.3 inches across inside and 3.8 inches tall wet, holding about 18 oz before it shrinks (12% shrinkage).
Is a 12 oz mug a big mug?
It is a standard coffee mug. With room at the top it holds a typical 10 oz coffee.
How do I make all my mugs the same size?
Weigh every ball to the same weight, use a gauge or ruler to throw to the same wet height and width, and keep wall thickness consistent.
How we estimate clay: the finished pot's wall and base volume × the fired density of the body, converted back to wet clay using typical water content and loss on ignition, plus a trimming and throwing allowance. Cone temperatures: Orton Ceramic Foundation published equivalents for self-supporting cones (°C converted). Glaze and plaster maths use standard slurry density relationships. Always follow your clay and glaze supplier's own data and safety sheets.